Product.Nr. SDX-418
SDX-418 Class D Amplifier with DSP
EUR 1.849,00
incl. 19 % VAT excl. shipping costs
weight 11 kg
product description
SDX-418 Class D Amplifier with DSP
1U Class-D Amplifiers with DSP
Build in German DSP technology
The SDX Series is the logical evolution of the successful SX Series in 1U Class D technology. The integration of the DSB board, developed and produced in Germany, has made it possible to achieve impressive performance data. Like the DSM-428 and 428-FIR DSP processors, the SDX power amplifiers are managed and programmed via the DSM Network Client. The SDX power amplifiers can be controlled individually or in groups via the DSM software. Output power has also been significantly increased. The SDX-427 now delivers 4x3500 watts into 8 ohms and the SDX-418 4x2000 watts into 8 ohms.
SDX-418 GS1 (EAN) CODE: 4260318513272
SDX-427 GS1 (EAN) CODE: 4260318513289
SDX-427 GS1 (EAN) CODE: 4260318513289
| Model Name | SDX-418 |
|---|---|
| GS1 (EAN) CODE | 4260318513272 |
| System Type | 4-Channel Class D Amplifier with DSP |
| Output Power all channels driven 20Hz - 20 kHz, 0.1 % THD |
4 x 4950W @ 2Ohm 4 x 3250W @ 4Ohm 4 x 2000W @ 8Ohm |
| Output Power Bridge mode |
2 x 8400W @ 4Ohm 2 x 6600W @ 8Ohm 2 x 4000W @16Ohm |
| THD+N @ 8Ω 1kHz,1dB | ≤0.05% |
| Slew Rate | >30v/μs |
| Frequency Response @1Watt, 8Ohm |
10Hz -20kHz / ±0.35dB |
| Damping Factor (@100Hz) |
>3000 |
| Signal to Noise Ratio 20Hz -20 kHz |
>99dB |
| Channel Separation Crosstalk@1kHz |
>70dB |
| Voltage Gain | 45dB (0,775V:127V) |
| Input Sensitivity | 1,54 Vrms 6dBu max. 20 dBu |
| Input Impedance | 20k Ohm Balanced 10k Ohm Unbalanced |
| Front Control | Power switch, Mute Switches |
| Rear Control | Ethernet, Powercon and speaker sockets |
| LED Indicators | Signal and output level VU-Meter Protect, Mute, Bridge, Network, DSM-Software connected |
| Input Connectors | XLR Active balanced pin1 gnd / pin 2+ / pin3- |
| Output Connectors | 4 Neutrik NL4 Sockets |
| Cooling | Low Noise Continuously Variable speed fan |
| Protection | Full short circuit, Open circuit, thermal, Ultrasonic, RF Protection. Stable Into reactive or Mismatched loads |
| Load Protection | On/Off muting DC fault power Supply shutdown |
| Operating Voltage | 230V (+/- 10%), 50-60Hz USA Version 110V (+/- 10%), 50-60Hz |
| Idle Power Consumption |
< 155W |
| Max. Power Consumption |
< 8500W |
| Fuse | 2xT-20A |
| Dimensions (h/w/d) | 19“/1U 483W x 486D x 44H |
| Net weight | 11,5 kg |
